Five things decide parts management in field service: where parts are held, how you replenish, reserve and book them, and how returns work. Get them right and the van carries the part the job needs, machines keep running, and no money sits idle in stock.
Where does parts management go wrong in field service?
Usually in one of five places:
- Maintenance: the technician is on site without the right part and has to come back.
- Inventory: what is in the van does not match what the system says.
- Customer: the customer waits because a part has to be ordered first.
- Material: obsolete and rarely used parts sit on the shelf for a long time.
- Costs: a lot of money is tied up in stock, yet the one critical part is missing.
A missing part can mean a second visit, with more travel and time on site. If the contract price covers that visit, it eats into your margin. See service contracts and margins.
What does it cost to keep parts in stock?
Every part in stock costs money, even if it is never used. It ties up working capital, and obsolete stock adds further cost. Lower stock levels therefore often reduce your overall inventory costs.
We advise deciding for each part where it lives. What technicians use often belongs in standard van stock. An expensive or rarely used part stays central and is reserved per job. The IFS Cloud classification and service rate, covered under the KPIs below, help with that choice.
How do you manage the stock in a technician’s van?
As a warehouse in its own right. In IFS Cloud you set up a service van as a remote warehouse, which belongs to your site but stands, or drives, somewhere else. For each van you define an assortment, with a refill point and a refill-to level for every part.
Under My Stock in the app, the technician sees what is available and what is reserved for their work. If a part is missing, Find Part in IFS Service MWO searches nearby vans and depots online, and shows which colleague has it.
You decide who may use van stock. In the set-up IFS recommends, only the technician connected to the van uses it, for their own work.
How do you replenish van stock?
On a fixed rhythm, from the van’s assortment. Refill All Putaway Zones creates transport tasks, shipment orders or purchase requisitions to top the van up. You can also run it as a scheduled job.
For a van on the road, IFS advises against automatic refills after every transaction. A transport task would then reserve material that cannot reach the van. Technicians also cannot refill their own van from the central warehouse in the app; that happens in IFS Cloud Web. So agree who watches replenishment and when vans are restocked.
At Emergya Wind Technologies (EWT), technicians booked used materials on their tablets. The published story describes more reliable replenishment of service vehicles, with transfers on designated days and less reliance on urgent requests. That earlier project included the upgrade to IFS Applications 9, which Eqeep checked and tested. Read the EWT story.
How do you make sure the part is ready for the job?
By reserving it against the work task. In IFS Cloud you can reserve once the task is under preparation, but never more than is available. Parts not in stock are bought through a purchase requisition from the task.
If the technician has a default warehouse, usually their van, IFS reserves automatically only there. If they have connected warehouses but no default, IFS reserves nothing.
If the reservation sits in the central warehouse, a transport task brings the part to the van. The technician receives it there before issuing it to the task. Open reservations are deleted at the status Finished.
Agree the split between van and central warehouse with your planners. How they plan is covered in our article on service planning.
How does the technician book parts used and returned?
On site, even when the part was not planned. For an unplanned part, Quick Issue creates the material demand and issues it in one step. Excess material that was already issued goes back with Unissue.
That keeps van stock, and so replenishment, accurate. It also puts the part on the work order, for invoicing and cost per asset, as our article on maintenance costs explains.
An unused part goes back to the van, or to the central warehouse with a transport task. A planned return updates the task costs. A quick return works online only and does not appear in the returns overview. When a technician swaps a part in IFS Service MWO, a material code can create a return line for the old part straight away.
How do you keep defective parts apart from good stock?
With a condition code, such as new or broken. Condition codes suit parts that you have repaired or overhauled, and they only work for serial- or lot-tracked parts. Once switched on for a part, they cannot be switched off. With cost per condition, a defective item carries its own stock value.
The valuation method, usually a finance choice, decides whether technicians can return parts in the app. With standard cost they can, once the cost is defined. According to IFS, FIFO and LIFO parts never can. Weighted average parts can only be returned with cost per condition, which is available only for serial- or lot-tracked parts.
In all other cases the office books the return. So choose the method together with finance, before the first stock arrives.
Which KPIs show whether your parts management works?
These five key performance indicators (KPIs) belong together on one dashboard:
- Inventory fill rate: the percentage of orders fulfilled successfully at the first attempt. In service, these are material requests from work orders.
- Slow-moving parts: the parts that stay unused in your warehouse for a long time.
- Holding costs: what it costs to keep parts, including those that remain unused.
- Stock-out: how long a part is unavailable for immediate use.
- Lead time: the time between ordering a part and having it available. A long lead time calls for more safety stock.
IFS Cloud can classify parts by their issue history. Inventory Planning and Replenishment (IPR) looks at volume value (A, B or C), frequency (from fast mover to very slow mover) and lifecycle stage. IFS says this helps identify candidates for termination.
For each group you set a service rate: the likelihood that a part is in stock when needed. A higher rate means more safety stock. If IFS Cloud replaces another system, import the old usage history so the classification does not start from zero.
Check beforehand which functions your licence includes. IPR also has a limit: according to IFS, it offers no particular support for parts supplied by repairing defective ones. Plan that repair flow separately.
How did Optronica use FSM for service and stock?
As one system for contracts, scheduling, technicians and stock. Optronica is an independent service organisation for ophthalmic equipment. Its customers, healthcare organisations in the Netherlands, needed critical parts in stock and repairs done as quickly as possible.
With Eqeep, Optronica implemented the standalone IFS Field Service Management application, including stock management and mobile apps. This was an earlier FSM project, not an IFS Cloud implementation. Read the Optronica story.
Where do you start?
With four questions for your own team:
- Who watches van replenishment, and on which days?
- Does every technician with connected warehouses have a default warehouse?
- Which valuation method do your service parts use?
- How do defective parts come back, and are they serial- or lot-tracked?
We review with your team how parts move through your service process today. You choose which process changes first. Start with an analysis.
Questions about parts and inventory management
Can a technician order parts themselves in IFS Cloud?
Partly. In IFS Service MWO they can add a material demand to a task and buy ad hoc from a registered supplier. The transport task that refills their van from the central warehouse is created in IFS Cloud Web.
Why can a technician not return a part in the app?
Often because of the valuation method. IFS says mobile users cannot reasonably be expected to know a part’s cost. So for FIFO, LIFO and weighted average without cost per condition, the system returns an error. Standard cost parts can be returned if the cost is defined.
Which KPIs should you use for service parts?
Start with five: fill rate, slow-moving parts, holding costs, stock-outs and lead time. Also count the repeat visits caused by a missing part.
Discuss your IFS question
Tell us where you stand with IFS. After one conversation you will have a clear next step. Mention which part most often causes a second visit today. Discuss your IFS question